Can I Rollerblade in the Rain? - Inline Skate Stars (2023)

Can I rollerblade in the rain? The straightforward answer is yes! However, rollerblading in the rain can be risky because of the wet and slippery surface, making falling inevitable. Also, skating in the rain damages your inline skating shoes’ bearings, putting you at more risk. So, while you can skate in the rain, it’s important to be careful lest you get hurt.

Below is a quick rundown of what to do to keep safe when you have to skate in the rain.

  • Always Stay Low in the Recommended Skating Position
  • Avoid Pools of Water on the Road or Pavement
  • Wear protective gear for Skating
  • Use Special Rain Wheels
  • Avoid Longer Pushes and Glides
  • Maintain Low Speed and avoid doing Tricks
  • Clean and Store your Skates in a Cool and Dry Place after Rollerblading

But this is only the scratch on the surface. In the rest of this guide, I go deep into why rollerblading in the rain is risky and how to keep safe. So, without much ado, let’s get to it!

Why Rollerblading in the Rain can be Risky

Sometimes, rollerblading in the rain isn’t an option, especially when you have to rollerblade to work. When this is the situation, you only need to protect yourself from rollerblading-related dangers. So let’s quickly expound on why rollerblading in the rain can be risky.

Wet and Slippery Surface

If you’re like most skaters, you’ll most likely skate on the roads with asphalt. But even when skating in an unused parking lot, the surface will often be asphalt because only a few parking spaces use concrete and cobblestones.

That being said, asphalt surfaces are more slippery when wet, making it a hassle to skate on them. Also, while skating, your wheels will slide, making it hard to maintain your balance. This brings us to the next thing—falling, which is inevitable when skating on wet surfaces.

Falling is unavoidable

Falling is unavoidable when skating, whether the surface is dry or wet. However, you’re more susceptible to falling when the surface is wet, especially when skating in the rain or after a downpour.

So, if you don’t know how to fall without hurting yourself, you can pick several injuries. When you trip and fall because of a slippery surface, you’re likely to suffer head injuries, broken wrists, ankles, and tailbone. The pain is often unbearable, especially when the fall is severe.

Skating in the Rain Damages your Bearings putting you at more Risk

Water reacts with the metal bearings in your rollerblades, making them rust. When rust builds in the bearings and wheels, they stick, preventing smooth rotation of the wheels.

In addition, this may loosen the bearings and wheels, putting you at more risk in case they come out when skating. This can cause a disastrous accident, especially when rollerblading at high speed.

Apart from damaging the bearings, rollerblading in the rain also damages the fabric used to make the inline skating shoes. This is more likely to occur if your skates aren’t hard boots. If you skate in the rain for long, you may have to budget for new rollerblades pretty soon.

Safety Tips When Rollerblading in the Rain

When falling is inevitable and skating in the rain isn’t a choice, there has to be a way to protect yourself from the risks. Sure, there is not one but several things you can do to keep safe when rollerblading in the rain. So, let’s get to it!

1. Always Stay Low in the Recommended Skating Position

Staying low is one of rollerblading best practices because it goes a long way to help achieve stability, body balance, and control. Like we’ve already seen, skating on a wet and slippery surface reduces balance and stability, making it easy to fall.

However, by bending correctly, you should have your body weight well distributed. The recommended skating position involves bent knees over the toes and shoulders above your hips. This helps transfer your body weight to your footballs.

If you’re yet to master this skill, it will be best to learn it before hitting the roads to rollerblade in the rain. In addition, it can be a little uncomfortable in the beginning, but trust me, it’s worth the effort.

2. Avoid Pools of Water on the Road or Pavement

Pools of water on the roads or pavements pose a lot of risk to skaters. Many times, what you see on the surface is a fraction of what is below it. The pool of water you see can be a massive pothole that can damage your skates and break your feet. So, the best way to stay protected is to avoid skating into pools of water on the roads.

3. Wear protective gear for Skating

Wearing protective gear for skating goes a long way to protect your body if you fall because of the wet and slippery surface. The basic protective gear for rollerblading includes a helmet, elbow pads, wrist guards, and knee pads.

Other protective gears you may want to have are shin guards, hip pads, and eyeglasses. They may not be entirely necessary, but there’s no harm to have them anyway. A helmet helps protect your head from head injuries.

In addition, you can use a bike or skateboard helmet provided they’re ASTM F 1447 and ASTM F 1492. These are the recommended helmet type according to the US Consumer Product Safety Commission. These are the best helmets because they’re dual impact, meaning you can still use them more after falling.

Lastly, elbow pads are for protecting your elbow, wrist guards and gloves are for protecting your wrists, palms, and fingers, and knee pads are for protecting your knees from bruises in case you fall.

4. Use Special Rain Wheels

Not all types of wheels are suitable for skating in the rain. In particular, you want to avoid hard wheels of 85A and above because they offer little grip on wet and slippery surfaces. Instead, you want to use soft wheels of 70A grade.

For the sake of skating in the rain, you can have two sets of wheels to alternate when necessary. Each time you go rollerblading in the rain, you can remove your hard wheels and replace them with soft ones.

Below is an informative YouTube video for more inspiration.

5. Avoid Longer Pushes and Glides

You also want to avoid long pushes and glides when rollerblading on wet surfaces. In my opinion, it’s more important to get to your destination in good shape than with injuries. So, it goes a long way only to make small strides until you get to your destination. The good news is that if you have these special rain wheels, you shouldn’t stress over long pushes and glides.

6. Maintain Low Speed and avoid doing Tricks

You want to maintain a low speed because skating at high speed can be disastrous. In addition, doing tricks on wet surfaces should be a big no unless you’re a pro skater already. Keep your skating simple and focus on arriving safely. You’ll be glad you followed this!

7. Clean and Store your Skates in a Cool and Dry Place after Rollerblading

Lastly, you want to clean and store your rollerblades in a cool and dry place after every skating session. It’s recommended to use some warm water to remove any dirt stuck between the wheels and the bearings. Then, use a towel to dry your skates before lubricating them with grease. Lastly, store them in a cool and dry place to prevent rust in the bearings.

Can I rollerblade in the Rain? Final Thoughts

Can I rollerblade in the rain? Absolutely yes. However, it would help if you had special rain wheels, protective gear for rollerblading, skate at low speed, avoid long pushes and glides, stay in the bent position, avoid pools of water on the road, and to clean your skates then, store them in a cool and dry place to prevent rust in the bearings.

Is Pole Dancing Hard? Watch This Be...


Can I Rollerblade in the Rain? - Inline Skate Stars? ›

So, can you inline skate in the rain? You should avoid rollerblading in the rain. It becomes extremely slippery and it takes you longer to stop. Your skates can slip easily in both pushing and when turning, so falls are likely.

Can you inline skate when it's wet? ›

Skating on wet surfaces can be dangerous, whether you are using inline skates or quad roller skates. It will be slippery, making you more likely to lose control, slip, and fall. Slippery surfaces also make it difficult to predict anything in advance; thus, your skating session can become more stressful than fun.

Can you skate in the rain with ceramic bearings? ›

Ceramic bearings are not only suitable for use in the rain, they are also simply the fastest bearings available, even on dry road surfaces. Ceramic bearings are used always in inline skate races. They are also maintenance friendly.

Does skating in the rain ruin bearings? ›

It's strongly advised not to ride a skateboard in the rain or when it's wet outside. The bearings will deteriorate from the inside, The grip tape could peel off and lose grip, The deck will lose its pop and becomes waterlogged or delaminate.

Should I skate when wet? ›

As much as possible, try to avoid getting your skateboard wet. Water is bad for the bearings, board, trucks and bolts. Plus, you might have to deal with hydroplaning, which could affect your ability to control the skateboard. So, try not to skate in the rain or through puddles.

How do you dry inline skates? ›

After skating I take liners out and leave to ventilate and dry in the wind. If no wind or bad weather, I vent them inside the house in front of a fan. (Also remove the insole/footbed from the liner.)

Can you rollerblade on pavement? ›

Yes. That's what I do. It seems like skating in parks is a nuisance to people who are there with dogs or children, and skating on the sidewalk is just treacherous if you're trying to reach any level of speed or get a good workout, so I do skate almost entirely in the street.

Can you ice skate on wet ice? ›

Outdoor ice rinks are subject to the elements and due to rain, unseasonably warm weather, high winds or a combination of these weather conditions, the surface of the ice rink can develop a layer of water. It is not unsafe to skate on a wet rink, just more uncomfortable if you fall and get wet.

What are the best waterproof bearings? ›

Ceramic bearings made from zirconia or silicon nitride can operate when fully submerged and are the best option for an 'underwater bearing'.

What does ceramic coating do when raining? ›

Ceramic coatings effectively repel water. These surfaces cause water to condense into beads, but the coating is so durable that these little balls of water roll off the automobile and pick up dirt as they go. Every time it rains, the coating's hydrophobic features ensure your car's paint gets cleaned!

Does water damage ceramic bearings? ›

In addition, ceramic bearings and hybrid versions with stainless steel rings, such as the Schaeffler XC models, are more resistant to corrosion than steel bearings. For example, they can withstand water, detergents, and certain chemicals. They can also take high temperatures.

Can I use wd40 on my rollerblades? ›

In summary, our answer is: no. WD-40 it is not the most suitable product for lubricating skating bearings. While it can be used as an all-purpose water repellent/lubricant, WD-40 was not specifically developed to lubricate ball bearings, such as those used in roller skates or inline skates.

Can I use my rollerblades outside? ›

Technically, you can use indoor skates outside. However, we do not recommend it. Indoor rollerblades are designed for inside surfaces that are guaranteed to be smooth. Therefore, when you use it on a much-less-smooth surface outside, you will surely struggle when encountering obstacles.

Is it OK to rollerblade on the road? ›

Yes it is, as long as the road is safe. If it has bike lanes or its a slow road it will be safier. Well, to take your decision also consider that you will skate from 20 to 35km/h, so compare your speed with the road speed and decide. Helmets on, and go for it.

How do you dry wet roller skates? ›

The inside of roller skate boots can become damp, whether from spills, puddles, or just foot sweat. Wipe down your skates inside and out every time you take them off. Unlace them and leave them to air dry naturally. Don't put your skates near a heating source to dry them–this can damage them.

Top Articles
Latest Posts
Article information

Author: Reed Wilderman

Last Updated: 15/01/2024

Views: 6089

Rating: 4.1 / 5 (72 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Reed Wilderman

Birthday: 1992-06-14

Address: 998 Estell Village, Lake Oscarberg, SD 48713-6877

Phone: +21813267449721

Job: Technology Engineer

Hobby: Swimming, Do it yourself, Beekeeping, Lapidary, Cosplaying, Hiking, Graffiti

Introduction: My name is Reed Wilderman, I am a faithful, bright, lucky, adventurous, lively, rich, vast person who loves writing and wants to share my knowledge and understanding with you.